FOUR TEMPLATES · MEASURES IN MILLIMETRES
Explore parametric panel templates
The four examples share a starting size of 2,400 mm × 1,120 mm and a maximum depth of 120 mm. Each template changes the direction or the field of the wave; you can edit the measures, amplitude, spacing and thickness.
Vertical waves
Linear sine pattern with a frequency of 2.0, oriented at 0 degrees.
- Dimensions: 2,400 mm × 1,120 mm
- Starting spacing: 40 mm
- Starting thickness: 18 mm
Horizontal waves
Linear sine pattern with a frequency of 2.0, oriented at 90 degrees.
- Dimensions: 2,400 mm × 1,120 mm
- Starting spacing: 40 mm
- Starting thickness: 18 mm
Rings
Radial sine pattern with a frequency of 3.0 around the centre of the panel.
- Dimensions: 2,400 mm × 1,120 mm
- Starting spacing: 40 mm
- Starting thickness: 18 mm
Flow
Tilted wave with a frequency of 1.5 and a warp of 0.35.
- Dimensions: 2,400 mm × 1,120 mm
- Starting spacing: 40 mm
- Starting thickness: 18 mm
Material and fabrication preparation
The template sets the geometry, not the material. For a decorative interior panel, MDF and plywood are options a workshop can weigh up against the router bit, the clamping and the finish. The final choice depends on load, humidity, fibre direction and the machine’s limits. Check the material’s technical data sheet and make a test cut before you fabricate the full panel.
Read the fabrication step by step